|Rotameters are precision machined from clear block and fitted with|
|needle valves stream lined in appearance. They are designed to give maximum|
|Accuracy visibility & Ruggedness.|
|Stainless steel, Teflon, PVC or as per requirement. In bigger models guide rods|
|are provided for better stability.|
|For Accurate flow control precision machined needle type valves are|
|Standard Accuracy of 1.5 to 1% at full Scale. Better accuracy on specific|
|Top / Bottom or Rear as per requirement in S.S. screwed, Nozzle, with Suitable "0"|
|Rings to avoid leakage.|
|Carried out at works individualy using air and water at standard condition. Reliable|
|impirical conversion, are used to calibrate for other fluids.|
|Rotameter are ideal for direct Panel mounting because of their neat modular|
|apperance, online is also possible.|
Ji Japsin Instrumentation Acrylic Body Rotameter
|Range Ability||As per your Requirement|
|Tube Body Construction||Acrylic|
|Brand||"JI" Japsin Instrumentation|
|Temp Max||50 Deg C|
|Temperature Max||50 Deg C|
We offer Acrylic Body Rotameter. These Acrylic Rotameters are precision machined from clear acrylic block and fitted with needle valves stream lined in appearance. They are designed to give maximum accuracy visibility and ruggedness.
Floats: Stainless steel, Teflon, PVC or as per requirement. In bigger models guide rods are provided for better stability.
Metering Valve: For Accurate flow control precision machined needle type valves are
Accuracy: Standard Accuracy of 1.5 to 1% at full Scale. Better accuracy on specific
Fittings: Top / Bottom or Rear as per requirement in S.S. screwed, Nozzle, with Suitable "0" Rings to avoid leakage.
Calibrations: Carried out at works individual using air and water at standard condition. Reliable impirical conversion, are used to calibrate for other fluids.
Installation: Rotameter are ideal for direct Panel mounting because of their neat modular appearance, online is also possible
Metering Body: Acrylic Plastic
Wetted Part: SS / Brassi PVC / Teflon
Float: SS / Teflon / PVC / P.P.1/4" NPT / BSP / Screwed rear with valve
Pipe Connections: Fanged top bottom/rear
0 Ring Standard: Neoprene / Teflon Viton Silicon
Scale: Engraved on the body
Press Ration: To 100 PSIG Std
Rating: 0 Pt higher rating on special application
Temperature: Upto 70° C
Accuracy: + .5 To + 1% at F.S.
Acrylic Tube Rotameter
|Range Ability||As Required|
|Float Material||As Required|
|Available Sizes||As Required|
|End Connector||As Required|
We offer Acrylic Tube Rotameter with control valve.
Case: Acrylic block
Application: For Fluid as per requirement
Range: in ranges of LPM or LPH or M3/Hr or as per requirement
Temperature: 40 deg C (max)
Pressure: Max. 10 Kg/cm2
Description: Precious flow measuring instruments designed on the “Variable Area” Rota meter basis using tapered tubes.
Metering Tube: Acrylic tube
Control Valve: Provided of SS
Float: SS / PVC
End Fittings: Screwed connection (as per requirements) at both side ends of top & bottom
Accuracy: +/- 2% FS
Glass Tube Rotameter
|Range Ability||As per Requirement|
|Tube Body Construction||Stainless Steel|
|Temperature Ratings||As per Requirement|
|Brand||"Ji" Japsin Instrumentation|
|Temp Max||100 Deg C|
We offer Glass Tube Rotameter.Glass Tube Rotameter are Precision flow measuring instruments designed on the "Variable Area" Rotameter basis using "Tapered Tubes". These instruments are suitable for service with all available fluids including Acids, Alkalies, Corrosive gas and Organic Solvents for Temperature upto 150°C with suitable selection of material.
Metering Tubes: Extra Thick chemically Resistant annealed and stress Relieved TAPERED glass.
Floats: Suitable for all corrosive or non corrosive liquids / gases, S.S. Teflon, PVC etc.
Fittings: End fittings are either screwed or flanged or for hose connection
Calibration: Calibration is carried out individually at works using Air and Water at standard condition, with Reliable empirical conversion for other Fluids / Gases
Metering Tube: Borosilicate Tapered glass
Float: S.S 304, S.S.316/Teflon/PVC
End Fitting standard: Aluminium body with Ms. cover with transparent acrylic cleat/ toughed glass
Scale: White acrylic/Acrylic/Aluminium coated
Colour: Blue/Hamertone Grey
Press Rating: Upto 150 PSIG
Temperature: Upto 150°C
Accuracy: + .5 TO + 1% at F.S.
Metal Tube Rotameter
|Tube Body Construction||Glass|
|Country of Origin||Made in India|
|I deal in||New only|
We offer Metal Tube Rotameter.
Pipe material : SS 304
End Fittings : ½” ASA 150 Rf # flanges of SS at Top & bottom connection
Range : 0 to 5.400 M3/Hr
Application : Oxygen
Temp. Max : 100 deg C
Pressure Max : 10 Kg/cm2
Make : Ji
Accuracy : +/- 2% FS
Bypass Glass Tube Rotameter
We offer Bypass Glass Tube Rotameter.
Description: As per enclosed catalogue with MS flanges, SS orifice, SS pipes & SS valves
Metering glass tube rotameter: By the side
End Fittings: 6” MS powder coated Flanged connection
Range: 0 to 300 M3/Hr.
Applications: For Furnace oil 380 cst
Operating temp: Max 100 deg C
Operating pressure: Max 10 Bar
Accuracy: +/- 2% FS