Japsin Instrumentation
Kalbadevi, Mumbai, Maharashtra
Send E-mail
Send SMS
Home»What We Offer»

Pressure & Temperature Calibrator

Pressure calibrators, Handheld Pressure Cum Vaccum Calibrator, Comparison Pressure Test Pump, Dead Weight Tester for Pressure Gauge Testing, Temperature Calibration Bath , mV/mA/RTD Calibartors, RTD/thermocouple Calibrators

REQUEST CALLBACK
Get Best Quote

Approx. Rs 600  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Display TypeDigital, Analog
BrandJi
ModelJi 408
Model: Ji 408
DISPLAY : 4½ digit 0.5”ht LCDRANGES : 0-199.99mVDC / 0-10.000VDC0-19.999mADCACCURACY : ± 0.05% ± 2 digit for mVDC± 0.1% ± 2 digit for VDC± 0.25% ± 2 digit for mADCMILLIVOLT / VOLT/MILLIAMP : Selectable by a Push ButtonSOURCE /MEASURE : Selectable by a Push ButtonSOURCE : Milli Volt / Volt or Milli Amp adjustable by means of ‘Coarse’ &‘Fine’ Potentiometers in “Source” modePOWER : 9V DC Battery (2 Cells)

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: MUMBAI
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 660  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Display TypeDigital, Analog
ModelJi 406
MODEL : Ji - 406DISPLAY : 4½ digit 0.5”ht LCDRANGES : 0-±199.99mVDC / 0-±19.999mADC /-100.0°C to + 400.0°CACCURACY : ± 0.05% ± 2 digit for mV/mA /±0.25% ± 2 digit for PT-100 RTDmV/mA/PT - 100 RTD : Selectable by a Push ButtonMILLIVOLT / MILLIAMP : Selectable by a Push ButtonMEASURE / SOURCE : Selectable by a Push ButtonEXTERNAL PT-100 RTD/PT-100RTD SOURCE : Selectable by a Push ButtonMEASURE : Measurement of mV/mA, External PT-100 RTD in °CSOURCE a) Millivolt / Milliamp output adjustable by means of ‘Coarse’& ‘Fine’ Potentiometersb) For PT-100 RTDi) In PT-100 RTD Mode/Measure Mode, the desiredtemperature in °C is adjustable by means of ‘Fine’(PT-100) Potentiometer.ii) In PT-100 Mode/Source Mode, the resistance value correspondingto the “Set Temperature” is available at the output terminals.POWER : 9 V DC Battery (2 Cells)
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 825  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Display TypeAnalog, Digital
MODEL : Ji - 407DISPLAY : 4½ digit 0.5”ht LCDRANGES : 0-600.0°C for Fe/ConT/C (J type)0-1200.0°C for Cr/Al T/C (K type)-100.0°C to +400.0°C for PT-100 RTDACCURACY : ±0.25% ± 2 digit for Fe/Con T/C / PT-100 RTD±0.25% ± 2 digit for Cr/Al T/C upto 1000°C±1% ± 2digit above 1000°C for Cr/Al T/CFe/Con T/C/Cr/Al T/CPT-100 RTD : Selectable by a Push ButtonSOURCE : a) Fe/Con T/C / Cr/Al T/C Output adjustable by means of“Coarse” & “Fine” Potentiometers.b) PT-100 RTD output is adjustable by means of“FINE” Potentiometer only.MEASURE : Measurement of external Fe/Con T/C, Cr/Al T/C, PT-100 RTD in °CAUTO CJC : Provided for ThermocouplePOWER : 9 VDC Battery (Two Cell)
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 5,000  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Display TypeDigital, Analog
MaterialSS
BrandRavika
Item : Dead Weight Pressure Gauge Tester
Description : Provided With A Gauge Connector Of ½” Bsp And Complete With One Set Of Weights (ms Phosphated) In A Storage Box, 1 Dust Cover, 1 Instruction Manual, 1 Tin Of Oil (1/2 Litre) And A Tool Box Containing, Adapter Of M20 X 1.5, ¼”, 3/8” Bsp, 4 Spanners, 1 Allan Key, 1 Screw Driver And One Set Of Spare Seals
Accuracy : +/- 0.1% Fs
Range : As Per Attached Catalog
Model : As Per Attached Catalog
Make : Ravika

Additional Information:
  • Delivery Time: 4 to 6 weeks
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 4,550  / Unit Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
BrandJapsin Instrumentation
WeightJapsin Instrumentation
We are well known manufaturer of Temperature Calibration Bath , which also konwn as Dry Block Temperature Calibrator.

The Test instrument Temperature Calibration Bath consist of two single enclosures. Front size 150 X 150 mm & 280 mm depth. They are connected with each other & equipped with a portable handle. The left enclosure contains a block with bore diameter of 18.5 mm & 110 mm depth which can reached from the top, face the reception of the test piece. In this block the heating cartridge & temperature sensor for the determination of the block temperature are installed / accesses from the bottom.

The right enclosure contains:

  • PID controller for control of the block temperature in which we can see the set value & present temperature of the block.
  • Power switches & power on indicator
  • Fan ON / OFF switch for cooling the block.

Operating Instructions:

The test instrument TB - 600 is a portable unit for service / calibrating / testing purpose as well as for operating & laboratory tasks.

  • After switching on the mains power switch the PID controller shows the temperature of the block. (PV). Below that green color LED shows the set value of the block (SV). To adjust the set point, press key (2) then a dot LED blinks near the first digit, then using up key (3) & down key (4) set the 0 - 9 digit again push the (2) key to move the dot LED to the second digit using up & down key. After setting the set point value press the set (1) key for setting the temperatures. For auto tuning press (2) key for 2 seconds the 'At' from OFF to ON. Then press (1) key to active the auto tuning process, During auto tuning, the instrument executes on contr. After 2 cycles of ON - OFF action, the instrument will obtain the values of PID parameters. If you want to escape from auto tuning status, press& hold key (2) for about 2 seconds until 'At' parameters appear again. Change 'At' from 'ON' to 'OFF', press (1) key to confirm, then the auto tuning process will be cancelled.
  • The PV shows continuously the temperature of the heating block. If the adjusted set temperature in the heating block is reached, the heating energy radiated from the block is dispensed by short switching on pulses of the heating cartridge, so the temperature inside the block is kept constant.
  • Cooling down the heating lock can be done quickly by switching ON the fan which produces higher amount of cooling air.

Adapter Pockets:

It has to be made sure that the heat transmission resistance between the heating block & the test piece (thermometer, temperature sensor, temperature switch) is as low as possible. Therefore it is necessary to use exactly adapted pockets.

Technical Specifications:

  • Regulation of the heating block: PID regulator
  • Temperature Range: Room temperature to 600 Deg C
  • Power Supply: 230 V AC, 50 Hz.
  • Power consumption: 1000 Watts
  • Accuracy: /- 0.5 Deg C

Additional Information:
  • Item Code: TB-600
  • Pay Mode Terms: T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 40000
  • Delivery Time: 7 days
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 9,350  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandJapsin Instrumentation

TEMPERATURE CALIBRATION BATH LOW RANGE -30 TO 125 DEG C (DRY BLOCK TYPE) , MODEL SEC-LT-30125

 

DESCRIPTION

The Test instrument consist of two single enclosures. Front size 150 X 150 mm & 280 mm depth. They are connected with each other & equipped with a portable handle. The left enclosure contains a block with bore diameter of 18.5 mm & 110 mm depth which can reached from the top, face the reception of the test piece. In this block the heating cartridge & temperature sensor for the determination of the block temperature are installed / accesses from the bottom.


The right enclosure contains:

1) PID controller for control of the block temperature in which we can see the set value & present temperature of the block.

2) Power switches & power on indicator

3) Fan ON / OFF switch for cooling the block.

ADAPTER POCKETS:

 

It has to be made sure that the heat transmission resistance between the heating block & the test piece (thermometer, temperature sensor, temperature switch) is as low as possible. Therefore it is necessary to use exactly adapted pockets.

 

TECHNICAL DATA:

 

Regulation of the heating block

PID regulator

Temperature Range

-30 to 125 deg C

Power Supply

230 V AC, 50 Hz.

Power consumption

1000 Watts

Accuracy

+/- 0.5 Deg C

 

DIMENSIONS:

 

 

Block Bore ID

18.5 mm

 

Immersion length

110 mm

 

4 numbers of Adapter pocket are provided extra with the following sizes

1) ID

6.1 mm

 

2) ID

8.1 mm

 

3) ID

10.1 mm

 

Size of the instrument

150 X 300 X 280 mm

 

Weight of the instrument


Approx. 8.5 Kg

 

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 3,405  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandJapsin Instrumentation
MaterialMS & SS
For calibration of Pressure Gauges and other sensing, transmitting and recording pressure instruments, we offer Dead Weight Pressure Gauge Tester. Relationship between pressure acting on the known area of a vertically free floating piston producing a force balanced by known dead weight is made use of in the Dead Weight Pressure Gauge Tester.



The main components of a Dead Weight Pressure Gauge Tester are


  • Screw Pump to generate pressure in the circuit. Of adequate capacity and operated by turning the spoked handle. Permits easy and accurate setting of pressure.
  • Free Piston Assembly of special steel, hardened, tempered, ground and lapped to accurate size and very fine surface finish to provide true floating action.
  • Set of Weights directly marked in convenient values of pressure and easily stacked on the carrier weight. Available in either/and kgf/cm2, bar Cbf/in units. Other units on request. Storage box provided. Incremental weights to provide smaller steps available at extra cost for all models mentioned below.
  • Gauge Connector of 1/2" BSP (female) union for connecting gauge to be tested. Other sizes of gauges can be connected by using adaptors.
  • Baseplate of sturdy construction provided with legs and levelling screws. The entire circuit is protected by a Sheet Metal Cover.

Additional Information:
  • Port of Dispatch: MUMBAI
  • Production Capacity: 50
  • Delivery Time: 6 weeks
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 2,250  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandJapsin Instrumentation
ModelJi - 700 -H
Max Flow Rate0 to 700
We offer Hand Held Pressure Pump.

Operating Instructions:

This is a pneumatic hand pump. Both pressure and vacuum can be measured. Put the master gauge on the front side of the pump where there is ¼” BSP female connection. On the side of the body there is a 1/4”bsp male connection with a cap. Remove the cap and fix the one side of the cable provided .Other side of the cable fix the gauge to be calibrated. Ensure all the connections are leak proof. Start pumping, When you reach the required pressure stop pumping. To set the gauge exactly use the big knob either clockwise or anti clock wise. To release the pressure use the small knob. If you want to measure vacuum there is a black knob with a rod. Insert the rod in the hole where written push for vacuum.


Specifications:

  • Lightweight hand held pressure cum vacuum pump
  • Pressure vacuum can be generated with fewer strokes by hand
  • Generates pressure up to 40 Kg/cm2
  • Push setting for generating vacuum up to – 1 Kg/cm2
  • Top ¼” BSP (F) adopter for the Master gauge
  • Side flexible tubing with ¼” BSP (F) adopter for gauges to be tested
  • Side release knob for pressure vacuum
  • Side zero adjuster knob
  • Accuracy: +/- 0.5% F.S.

Spares:

  • Extension cable
  • Adopters
(a) ¼” BSP(M) X ¼” BSP(F) - 1 No.
(b) ¼” BSP(M) X 3/8” BSP(F) - 1 No.
(c) ¼” BSP(M) X ½ ” BSP(F) - 1 No.
  • Vacuum or Pressure select Push Knob - 1 No.
  • Washers for ¼”, 3/8”, ½” Connection



Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 40000
  • Delivery Time: 7 days
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 5,070  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Brand/ModelJapsin Instrumentation

We offer Dead Weight Vacuum Gauges Tester. Model Dt-56 is used for calibration of vacuum gauges and other sensing, transmitting and recording vacuum instruments. The Vacuum Gauge Tester is a quick and convenient method of calibration free from the disadvantages of using the fragile mercury manometer.

 

The main components of the tester are:

  • Screw Pump: To generate the vacuum in the tester conveniently and precisely. Of adequate capacity and operated by turning the spoked handle.
  • Free Piston: Assembly of special steel, hardened, tempered, ground and lapped to accurate size and very fine surface finish to provide true floating action. The free piston is suspended vertically downwards from a rigid frame and connected by a pipe to the screw pump. A CARRIER weight is attached to the free piston for taking more weights.
  • Valve: It is provided to connect the circuit to the atmosphere and thus check zero of the gauge.
  • Gauge Connector: It is of ½' BSP (female) union for connecting gauge to be tested. Other sizes of gauges can be connected by using adaptors.

 

Technical Specifications:

Minimum Vaccum

Smallest Step

Maximum Vaccum

Unit

0.1

0.02

0.96

kgf/cm2

50

10

710

mmHg

2

0,5

28

inHg

 

Features of Model CT5:


  • Range: 0-710 mm Hg
  • For quick calibration with Master Gauge. The master gauge to be periodically checked on Dead Weight Vacuum Gauge Tester.
  • Two guage connectors are provided for connecting master and gauge to be tested to the same vacuum.
  • Screw pump is provided to generate vacuum in the circuit. Permits easy and accurate setting of vacuum.
  • Valve is provided to connect the circuit to the atmosphere and thus check zero of the gauge. BASEPLATE of sturdy construction provided with legs.

Additional Information:
  • Item Code: DT-56
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 1,450  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Max Flow Rate60 Kg/Cm2
BrandJI
ModelJi - 60 - M

Additional Information:
  • Delivery Time: 7 days


Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 2,200  / Set Get Latest Price

Product Details:
Minimum Order Quantity1 Set
Display TypeDigital, Analog
BrandJapsin Instrumentation
ModelJi - 40 - HH
Hand Held Pressure Pump Pressure Calibrator
Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 40000
  • Delivery Time: 7 days
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 13,050  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandJapsin Instrumentation

We are well known manufacturer and supplier of Dry Block Temperature Calibrator.

The Test instrument consist of two single enclosures. Front size 150 X 150 mm & 280 mm depth. They are connected with each other & equipped with a portable handle. The left enclosure contains a block with bore diameter of 18.5 mm & 110 mm depth which can reached from the top, face the reception of the test piece. In this block the heating cartridge & temperature sensor for the determination of the block temperature are installed / accesses from the bottom.


The right enclosure contains:

1) PID controller for control of the block temperature in which we can see the set value & present temperature of the block.

2) Power switches & power on indicator

3) Fan ON / OFF switch for cooling the block.

ADAPTER POCKETS:

 

It has to be made sure that the heat transmission resistance between the heating block & the test piece (thermometer, temperature sensor, temperature switch) is as low as possible. Therefore it is necessary to use exactly adapted pockets.

 

TECHNICAL DATA:

 

Regulation of the heating block

PID regulator

Temperature Range

-30 to 125 deg C

Power Supply

230 V AC, 50 Hz.

Power consumption

1000 Watts

Accuracy

/- 0.5 Deg C

 

DIMENSIONS:

 

 

Block Bore ID

18.5 mm

 

Immersion length

110 mm

 

4 numbers of Adapter pocket are provided extra with the following sizes

1) ID

6.1 mm

 

2) ID

8.1 mm

 

3) ID

10.1 mm

 

Size of the instrument

150 X 300 X 280 mm

 

Weight of the instrument


Approx. 8.5 Kg

 

Yes! I am Interested
X
 

Download Brochure
Explore more products
Gauge Cock
Get Best Quote
Barstock Thermowell
Get Best Quote
Pulsation Dampener
Get Best Quote
Roller Type Thermocouple
Get Best Quote
Japsin Instrumentation

Ramesh Sethi(Director)
40, Picket Road, 2nd Floor, Kalbadevi
Mumbai - 400002
Maharashtra, India
Send Email
© Japsin Instrumentation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited