Electronic Temperature Indicator & Controller

Our technical expertise allow us to offer Temperature Controller(blind) that is in high demand and ensures accurate readings. These Single Set Temperature Controller are used to analyze and control the temperature of a specific area or lab. Our clients can avail these from us at industry leading prices.
 
Specifications:

Input: Pt-100 / J, K Thermocouple, 4~20 mA

Display: 3½ Digit (+/-1999), 0.56"(14mm), Red LED Retransmission:4~20 mA / 0~1V / 0~10 V

Control: Heat / Cool / Hi-Alarm / Lo-Alarm
Output: 1C/O, 5A / 16A resistive
Identification: Differential value of +/-20°C Through deviation meter
Action: ON-OFF / Time Proportional
Hysterisis: Reset
Fixed Supply: 230 V / 110V AC +/-15
Accuracy:Depending upon Range.

Item : Digital Temperature Indicator cum Controller (Single set Point)
Input Sensor Calibration : Universal Input
Range : -50 to 400 deg C for PT -100
0 to 600 deg C for Fe/Co. type
0 to 1200 deg C for K type
Display : 3 ½ digit, 0.5” LED
Power Supply : 230 VAC, 5 Amp.
Control option : By push to set
Contacts : 1 NO & 1 NC
Housing : ABS plastic case with 2 side clamps for mounting
Dimensions : Front frame 96 X 96 mm
Panel cut out 92 X 92 mm Housing depth 110 mm
Accuracy : +/- 1digit

The family of indicators accepts a variety of RTD and Thermocouple sensor inputs and come in various DIN standard size to suit the user requirements the low power requirements of the unit, wide operating voltage and extremely low cost make them ideal for a no. of applications. In additions, Dual Indicators which have two independent sensor inputs and individual display are also available in a compact 96 x 96 x 110 housing.

Technical Specifications :

Input
Pt-100 / J, K Thermocouple, 4~20 mADisplay3½ Digit (+/-1999), 0.56"(14mm), Red LEDRetransmission
4~20 mA / 0~1V / 0~10 V etc.Supply230 V / 110 V AC +/- 25¬curacy  J, K Thermocouple +/-1%,Pt-100 -/+ 0.2% +/-1L.C.

This family of indicators accepts a variety of RTD and thermocouple sensors inputs and come in various DIN standard size to suit the user requirements. The low power requirements of the unit, wide operating voltage and extremely low cost them ideal for a number of applications. In addition, sensors sensor inputs and individual display are also available in a compact 96 x 96 x 110 housing.

Technical Specifications :

InputPt-100/J, K Thermocouple, 4~20mADisplay3½, Digit (+/-1999),0.56"(14mm), Red LEDRetransmission
4~20 mA /0~1V / 0~10 V etc.Supply230 V / 110 AC +/- 25%Accuracy  J, K Thermocouple +/-1%,Pt-100 -/+ 0.2% +/-1.L.C.

The controller incorporates two individual set points whose logic can be preset as per the user requirements. This type of controller can be used in systems like Heater - Blower applications, One control and one alarm Output, etc.

Technical Specifications :

InputPt-100 / J, K Thermocouple, 4~20mADisplay3½, Digit (+1-1999)0.56"(14mm), Red LEDAction(Set-1)ON-OFF / Time Proportional / DelayAction(Set-2)ON-OFFHysterisis / ResetFixed / Variable for each Set pointControlHeat / Cool / Hi-Alarm / Low-Alarm for individual Set PointOutput1C/O, 5A / 16A or 2C/O, 2A resistive for each Set Point or commonSet Point Adj.Single Multi-Turn Potentiometer for each SPSupply230V / 110V AC +/-15%Size96 x 96 x 150 mmAccuracy  J, K Thermocouple +/-1%,Pt-100 -/+ 0.2% +/-1 L.C.

This family of general purpose indicators include ammeters, Voltmeters, and other process parameters like pressure, humidity, RPM power which generate a- 4~20 mA 0~1 output.

Technical Specifications :

InputCurrent, Voltage, 4~20 mA ,0~1VRange100 Amps./ 1000 V or any other range.Retransmission4~20 mA / 0~1VDisplay3½ Digit (+/-1999), 0.56"(14mm),Red LEDSupply230 V / 110 VAC +/- 25%Accuracy0.1% +/- 2.L.C.